Dranetz Guide Instrucciones de operaciones descargar pdf (Pagina 10)

QUICK REFERENCE GUIDE

LPC4300

Page 10

\899036a 4-1-98

mating connector on the LPC4300. Firmly push the cable connector inward and

tighten the locking ring. Push the cable connector inward again while rocking it

from side to side. Tighten the locking ring again. Repeat this operation several

times until the locking ring is hand tight and cannot be tightened further. A slight

gap will exist at the back edge of the locking ring. Removal is the reverse of

installation. Loosen the locking ring. Pull back on the cable connector while

rocking it from side to side. Loosen the locking ring again. Repeat this

operation until the cable connector is free of its mating connector.

6. Connect the Domestic 115 VAC Cable to an appropriate outlet.

WARNING

Follow all safety precautions shown in this manual and the PP4300 Operator’s

Manual when making connections to the circuit to be monitored.

Figure 6. LPC4300 Connection Diagram (inside lid of case). 4300-

116

7. Connect the voltage and current measurement cables (if applicable) to the circuit

to be monitored. Use the probes and plug-on clips provided with the Power

Platform 4300. Refer to the connection diagrams inside the lid of the case

(Figure 6). See the PP4300 Operator’s Manual for operating instructions.

1 2 ... 5 6 7 8 9 10 11

Sin comentarios

Dranetz Guide Instrucciones de operaciones Pagina 10